We are looking for an experienced Traffic Control Technician to join our team!
The Traffic Control Technician is responsible for setting up and taking down lane closures and ensuring the safety of assigned traffic control projects. This role involves performing lane closures on state highways and other roadways, redirecting traffic for workers or survey crews, and working independently or as part of a traffic control crew. Additionally, the role also involves assembling, delivering, and picking up safety products from job sites, following contractor directions.
Operate company trucks to transport materials and equipment to job sites. Drive MOT (Management of Traffic) vehicle to and from projects and on work sites. Drive TMA (Truck Mounted Attenuator) vehicle to and from projects and on work sites to protect workers and work zones. Place temporary construction signs in work areas. Position arrow boards or variable message boards in work areas. Set up traffic cones and other traffic safety devices in work areas. Monitor the work zone throughout the shift to ensure items remain in their proper locations. Collect and load traffic control items at the beginning and end of shifts. Install, remove, and reset delineators, signs, posts, and supports. Perform shop work, including general maintenance and repair of equipment. Follow all safety rules and regulations to ensure a safe work environment. Adhere to all Company Policies and Procedures. Perform other work-related duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Requirements: Valid Driver’s License. 1-3 years of experience and 2,000 in field hours in traffic control. Must be able to pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Basic reading and writing ability to comply with road signs, complete paperwork, and knowledge of federal and state motor carrier safety regulations. Must be able to read plans and ensure traffic control plans are implemented and maintained. Good knowledge of state and local roadways and experience operating delivery vehicles of varying sizes. Ability to lift and move up to 70 pounds. Must successfully complete the ATSSA TCT intermediate training course. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule. Mechanical background/experience (preferred).
We are an Equal Employment Opportunity Employer Minority/Female/Disability/Veteran

We are looking for Flaggers to join our team!
Work with the Traffic Control Department at work sites to maintain a safe work zone. Direct motorists away from worker activities. By setting up and removing temporary cones, signs, variable message boards and safety barriers that show traffic where to drive. As well as holding up signs that tell traffic to either stop or proceed slowly. Must be constantly aware of both the construction and traffic activity taking place around them and perform duties listed below.
Set-up signs, cones, etc. around work areas to divert traffic Follow all safety rules and regulations and wear proper safety equipment (work boots – 6 inches with safety toe, hard hat and safety vest) Without Supervision must be able to set up and perform flagger position at job site based on site plan and or contractor directions Generally, works under the Supervision of Project Manager, other TCT, TCS or maybe assigned to work independently Adhere to all Company Policies and Procedures All other duties as assigned Complete daily paperwork accurately and timely Operate 2-way radio This is a driving position responsible for company vehicle while in use Work well in a team environment Must be able to communicate with contractors and relate specific customer/job changes, and other information to Supervisor, Project Manager, office staff or other persons Provide highest level of customer service to all customers Excellent attendance required, dependable transportation, good work ethic
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Requirements: Must have a valid Driver’s license. High School Diploma or GED Pass a drug test Hold a current Flagger certification or the ability to pass Company sponsored Flagger Certification, Ability to lead a small crew Successfully pass Company sponsored Defensive Driver training
Work Environment / Physical Requirements: Regularly exposed to outside weather conditions; moving equipment and machinery parts; moving traffic, and fumes and airborne particles Noise level of the work environment is usually moderate/loud Regularly required to stand/walk; reach with hands and arms; for up to 14 hours a day Occasionally lift and/or move more than 50 pounds
We are an Equal Employment Opportunity Employer Minority/Female/Disability/Veteran

Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

Description IntroductionAre you looking for a place to deliver excellent care patients deserve At Methodist Hospital we support our colleagues in their positions. Join our Team as a(an) Clinical Nurse Coordinator CNC Gen Special Surgery and access programs to assist with every stage of your career.BenefitsMethodist Hospital, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include:Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation.Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more.Free counseling services and resources for emotional, physical and financial wellbeing401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service)Employee Stock Purchase Plan with 10% off HCA Healthcare stockFamily support through fertility and family building benefits with Progyny and adoption assistance.Referral services for child, elder and pet care, home and auto repair, event planning and moreConsumer discounts through Abenity and Consumer DiscountsRetirement readiness, rollover assistance services and preferred banking partnershipsEducation assistance (tuition, student loan, certification support, dependent scholarships)Colleague recognition programTime Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence)Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income.Learn more about Employee BenefitsNote: Eligibility for benefits may vary by location.Are you a continuous learner With more than 94,000 nurses throughout HCA Healthcare, we are one of the largest employers of nurses in the United States. Education is key to excellence! As a majority owner of Galen College of Nursing, which joins Research College of Nursing and Mercy School of Nursing as educational facilities within the HCA Healthcare family, we make it easier and more affordable to gain certifications and job skills. Apply today for our Clinical Nurse Coordinator CNC Gen Special Surgery opening and continue to learn!Job Summary and Qualifications"The Clinical Nurse Coordinator (CNC) delivers high quality, patient-centered care and coordinates all functions in the unit. In partnership with the management team, the CNC monitors and evaluates nursing care in accordance with established policies. The CNC serves as a resource for staff and supports an unparalleled patient experience.What you will do in this role:Partner with a multidisciplinary team to coordinate, evaluate, customize, and deliver high quality, patient-centered care.Assist with admission and discharge processes.Partner with subject matter experts and leadership team to support improved outcomes and service.Provide coaching, feedback, and training to improve performance and engagement.Assist with staff scheduling.What qualifications you will need:Basic Cardiac Life Support must be obtained within 30 days of employment start dateRegistered NurseRegistered Nurse Diploma, or Bachelors Degree, or Associate DegreeOur Specialty Surgical Progressive Care Unit offers the following:32bedunitPatient-to-nurse Ratio is 1:4/5( with PCT support)Caring for a wide variety of post-surgical patients, some example are:Tracheal Esophageal SurgeriesColorectal SurgeriesTracheostomyLaryngectomyThyroidectomyBreast SurgeryLung SurgeryComplex abdominal related proceduresUrologyWoundvacsTele capableunitDedicated Educationunitwhere nursing students are routinely present completing clinicalsHighly motivated and high performing floorThis floor prides itself on maintaining some of the highest scores for patient and employee satisfaction across the division.Thisunitwas recognized in 2019 and 2021 as an HCAUnitof Distinction in the PCU categoryMethodist Hospital opened in 1963 as the first hospital in the now internationally acclaimed South Texas Medical Center. With over 900 beds, Methodist Hospital offers a broad range of specialties including cardiology, oncology, bone marrow transplants, emergency medicine, neurosciences, maternity care, gynecology and orthopedics. We are proud to be the largest provider of the lifesaving ECMO Program in San Antonio, are home to the largest robotics program in the world, and our Adult Blood Cancer and Stem Cell Transplant unit has become the first program to receive FACT Accreditation in North America. As the flagship hospital, and most comprehensive medical care facility of Methodist Healthcare, we appreciate the support and recognition we receive from the community. We’ve recently been named the No.1 Best Regional Hospital by the U.S. News and World Report for 2019-20. We pride ourselves on providing the highest quality of care possible for our patients, which is proven by our consecutive Grade A Leapfrog Hospital Safety scores. In addition, Methodist Hospital not only received a Primary Stroke Center designation from The Joint Commission, but has also received a Comprehensive Stroke Center Certification from DNV GL Healthcare, designating the facility as offering the most advanced stroke treatment available in a given geographic area. For more information, please visit our website at www.sahealth.com and select Methodist Hospital under Locations. "Good people beget good people."- Dr. Thomas Frist, Sr.HCA Healthcare Co-Founder If growth and continued learning is important to you, we encourage you to apply for our Clinical Nurse Coordinator CNC Gen Special Surgery opening. Our team will promptly review your application. Highly qualified candidates will be contacted for interviews. Unlock the possibilities apply today!We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Description IntroductionDo you want to be appreciated daily Our nurses are celebrated for being on the front line, empathetic for patients. At Methodist Hospital Stone Oak our nurses set us apart from any other healthcare provider. We are seeking a(an) Clinical Nurse Coordinator CNC Med Surg Oncology to join our healthcare family.BenefitsMethodist Hospital Stone Oak, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include:Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation.Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more.Free counseling services and resources for emotional, physical and financial wellbeing401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service)Employee Stock Purchase Plan with 10% off HCA Healthcare stockFamily support through fertility and family building benefits with Progyny and adoption assistance.Referral services for child, elder and pet care, home and auto repair, event planning and moreConsumer discounts through Abenity and Consumer DiscountsRetirement readiness, rollover assistance services and preferred banking partnershipsEducation assistance (tuition, student loan, certification support, dependent scholarships)Colleague recognition programTime Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence)Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income.Learn more about Employee BenefitsNote: Eligibility for benefits may vary by location.At Methodist Hospital Stone Oak, our nurses play a vital part. We know that every nurse’s path and purpose is unique. Do you want to create your own personal career path in nursing HCA Healthcare is your career destination! Our scale makes it possible for nurses to create the career path that fits their life – for life – and empowers their passion for patient care. Apply today for our Clinical Nurse Coordinator CNC Med Surg Oncology opportunity.Job Summary and QualificationsThe Clinical Nurse Coordinator (CNC) ensures and delivers high quality, patient-centered care and coordination of all functions in the unit/department during the designated shift. In collaboration with other members of the management team, the CNC directs, monitors, and evaluates nursing care in accordance with established policies/procedures, serves as a resource person for staff, and models a commitment to the organization’s vision/mission/values to support an unparalleled patient experience and clinical outcomes that contribute to overall departmental performance.What you will do in this role:Assists with admission and discharge processes to ensure efficient throughput and high quality, patient-centered care.Participates in the ongoing assessment of the quality of patient care services provided in the unit, in collaboration with other members of the management team.Collaborates with subject matter experts and other managers to create an environment of teamwork that supports improved outcomes and service.Supports a patient-first philosophy and engages in service recovery when necessary.Supports the efforts of the facility to improve engagement by operationalizing current nursing strategies, including employee rounding, hourly rounds, and other initiatives. Provides recommendations related to interviewing, selecting, and training new staff. Recommends and implements courses of action, including training and development, conflict resolution, personnel policy compliance, completion of performance evaluations, and/or disciplinary actions to ensure a competitively better organization.Assists with staff scheduling. Manages all practical aspects of staff labor in accordance with patient care needs and established productivity guidelines.Supports proper inventory control and assists with managing supplies and equipment.What qualifications you will need:Basic Cardiac Life Support must be obtained within 30 days of employment start dateRegistered NurseBachelors Degree, or Registered Nurse Diploma, or Associate DegreeOur Oncology unit offers the following.You will care for Med/Surg as well as Oncology patients that are receiving active chemotherapy treatments. Cancer patients.Nurse to patient ratio is 1:5 to 1:6.There are 27 beds.You will have the ability to help you become a CNC, ICU, ER, OR, PACU, or Interventional Radiology RN.20 to 25% of the patients are receiving chemo therapy.Room for growth.A lot of great training and mentorship.Team work is excellent. Family oriented.Will get great experience to help you grow as a nurse. Great place to learn time management.Methodist Hospital Stone Oak is equipped with the most modern technology available. With over 280 beds, services include emergency care, general surgery, obstetrics and gynecology, neonatology, oncology, neurosurgery, orthopedics, and acute rehab services. Methodist Hospital Stone Oak is accredited by the Joint Commission as a Primary Stroke Center and Chest Pain Center. The stroke rehabilitation program has received the Joint Commission's Gold Seal of Approval® for Disease-Specific Care Certification of Stroke Rehabilitation. We belong to the Texas Institute for Robotic Surgery. Our surgeons and technology offer minimally invasive options to patients. Surgeons from around the country come to train under our world class team. The hospital has been recognized by Leapfrog’s Hospital Safety Grade A and by Modern Healthcare as one of the Top 100 Best Places to Work in Healthcare. We have also been recognized as a Joint Commission Top Performer on Key Quality Measures®. Finally, by Medicare.gov as #1 in San Antonio and #6 in the entire nation. The hospital is 1 of only 102 hospitals to receive Medicare.gov’s 5-star rating. Join our team to be part of the innovation."The great hospitals will always put the patient and the patient's family first, and the really great institutions will provide care with warmth, compassion, and dignity for the individual."- Dr. Thomas Frist, Sr.HCA Healthcare Co-Founder Join a family that cares about every stage in your career! We are interviewing candidates for our Clinical Nurse Coordinator CNC Med Surg Oncology opening. Apply today and a member of our Talent Acquisition team will reach out.We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Area Director of Environment of Care (Facilities Management)- Skilled Nursing*** If you have 3+ years of experience in the skilled nursing industry as a Maintenance Director and seeking an opportunity to grow- this apply today!Must be able to travel weekly and support 24/7 with communitiesJoin our family. Make a meaningful difference. Become a part of The Team and contribute to our Mission of Serving Others.Touchstone Communities is dedicated to delivering top-notch care to our patients, residents, and Veterans. Our goal is to honor God by providing compassionate, skilled care to those in need. We are looking for individuals who are aligned with ourmission of enhancing the lives of those we serve. If you are passionate about making a difference, providing healing, and showing empathy in aworkplace that values every individual's voice,we invite you to submit your application today!Who are we seeking Commercial Electrical and Commercial Plumbing experience preferred.Troubleshooting and repair of equipment is preferred.OSHA 30-Hour training course required.Legionella Water Safety & Management certification preferred.Building Management System experience preferredMust possess strong technical assessment and observational skills.Will report to the VP of Environment of CareEssential Job duties include but not limited to:Appropriately assist the Administrator in managing Community Directors of Maintenance (DOM)Consistently ensure that the community maintains compliance to Life Safety requirements providing a safe environment for our residents, veterans, patients, family members and team members.Responsible for the interior and exterior physical environment to meet regulatory requirements.Train and assist DOM when the community has not or cannot resolve any issue.Assist, provide on-going training and consulting with Community Maintenance Supervisors and their assistants as needed on all duties and requirements of the maintenance department.Assess the use of TELS for:•Completion of assigned task and accurate reporting•Downloading of reports (fire drills, fire safety inspections, generator reports, etc.)•Work order usage•To ensure compliance across the organizationConsult with contractors on scope of work and pricing in proposals for work.Manage contractors, inspect contracted work, and providers guidance on discrepancies.Conduct annual community audits to include Life Safety, equipment condition, building appearance, deferred maintenance, safety concerns, capital needs and maintenance staff assessments.Function as the subject matter expert for the regional team on Life SafetyAbility to interpret operating policies and procedures and to review work performance in determining conformance to these recognized standards.We offer our eligible team members an appealing benefits package that includes medical, dental, wellbeing, and vision benefits, along with other unique perks such as:We offer a health allowance which covers the team member medical plan! Benefits start the 1st of the month after employment.Salary Range: $60,000- $65,000 DOE.Additional supplemental benefits are offered including pet insurance!Paid Time Off; Bereavement Pay; and Jury Duty PayTuition Reimbursement ProgramMatching 401(k)Travel reimbursement per company policyCell phone reimbursementLegal benefits and will preparationAvailability of Team Chaplain

Overview: Tire Technician – Part-Time – Bee CaveDiscount Tire3922 RANCH RD 620 SBEE CAVE, TX, 78738-6301OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Scale From $16$17Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Responsibilities: #discounttire21

AutoReqId: 20958BR Pay Class: Hourly Hourly Pay Rate: $27.92/hr DOE Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Night ShiftMaintenance Electrician for our Servtex quarry located in New Braunfels, Texas . Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a Maintenance Electrician to perform basic corrective, preventive and predictive plant maintenance, and operational field support. Perform electrical repair and maintenance involving disassembly, overhaul, assembly, and adjustments of crushing and screening or mobile equipment componentsPerform electrical repair and maintenance on ready mix concrete and hot mix asphalt plantsMaintain proper tool/parts inventory for specified jobsPerform scale and automation checks for concrete and asphalt plantsProduce accurate estimates and project costsComplete maintenance projects in a timely manner to ensure production goalsMaintain up to date written or data input spreadsheets on all equipment repairsEnsure that all equipment repairs are performed accurately to the manufacturer standardsEnsure compliance with all health, safety, and environmental regulations, as well as company policies and procedures; assist with physical inspections of plant property/departments and immediate reporting of unsafe conditions and/or accidentsAssist with maintenance task when not performing electrical task What We Are Looking For A minimum of 2 years of electrical experience is requiredCompletion of an apprenticeship program or certification strongly preferredHigh school diploma or GED preferredPrior maintenance experience is a plus.Some welding experience desiredOpen pit mining operations and aggregate products experience a plus.MSHA Part 48 training a plus Physical Requirements Sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Req ID:451047Address: 1855 N Foster Rd San Antonio, TX, 78244Benefits:* Fuel Your Growth with Love's - company funded tuition assistance program * Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay.Paid vacation, holidays, and sick time -10 days of vacation for the first year (plus sick time).Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doFire Sprinkler Installation employees are responsible for the installation, service, and repair of fire protection systems including wet, dry, pre-action, deluge, and foam suppression systems, as well as fire pumps and back flow devices. Installer III employees are also responsible for the execution of the installation project plan including equipment delivery, accurately forecasting installation hours, anticipating potential challenges, and properly securing all Johnson Controls Fire Protection/Grinnell tools and equipment at the end of each work period to prevent damage or loss.How you will do itApplies judgment based on practice and precedence.May allocate work as a team leader, bringing all changes, discrepancies, and coordination problems that impair installation activities to the immediate attention of the construction manager.Frequently resolves problems through the research of multiple alternatives. Must maintain proper documentation for all work performed.May review project drawings to obtain all facts necessary to perform installation activities according to specifications.Must be able to work alternative shifts or weekends to meet customer and/or job requirements.Overtime may be required.Must adhere to all company safety policies and procedures.May be required to perform Inspections. What we look forRequired Minimum 5 years documented experience in installation and service of fire sprinkler systems.High School Diploma or equivalent required.Follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools weighing up to 70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 60 feet, working within ducts, crawl spaces, above ceilings, etc.Read and understand construction blueprints, diagrams, and specifications used in installation activities.Ability to work flexible hours.Ability to adhere to, implement, and always follow safety guidelines and procedures.Excellent communication skills, using tact and diplomacy when dealing with customers and team members.Strong organizational skills, positive attitude, and ability to learn quickly.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Description ntroductionDo you want to be appreciated daily Our nurses are celebrated for being on the front line, empathetic for patients. At Methodist Hospital Stone Oak our nurses set us apart from any other healthcare provider. We are seeking a(an) Clinical Nurse Coordinator CNC Med Surg Oncology to join our healthcare family.BenefitsMethodist Hospital Stone Oak, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include:Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation.Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more.Free counseling services and resources for emotional, physical and financial wellbeing401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service)Employee Stock Purchase Plan with 10% off HCA Healthcare stockFamily support through fertility and family building benefits with Progyny and adoption assistance.Referral services for child, elder and pet care, home and auto repair, event planning and moreConsumer discounts through Abenity and Consumer DiscountsRetirement readiness, rollover assistance services and preferred banking partnershipsEducation assistance (tuition, student loan, certification support, dependent scholarships)Colleague recognition programTime Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence)Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income.Learn more about Employee BenefitsNote: Eligibility for benefits may vary by location.At Methodist Hospital Stone Oak, our nurses play a vital part. We know that every nurse’s path and purpose is unique. Do you want to create your own personal career path in nursing HCA Healthcare is your career destination! Our scale makes it possible for nurses to create the career path that fits their life – for life – and empowers their passion for patient care. Apply today for our Clinical Nurse Coordinator CNC Med Surg Oncology opportunity.Job Summary and QualificationsThe Clinical Nurse Coordinator (CNC) ensures and delivers high quality, patient-centered care and coordination of all functions in the unit/department during the designated shift. In collaboration with other members of the management team, the CNC directs, monitors, and evaluates nursing care in accordance with established policies/procedures, serves as a resource person for staff, and models a commitment to the organization’s vision/mission/values to support an unparalleled patient experience and clinical outcomes that contribute to overall departmental performance.What you will do in this role:Assists with admission and discharge processes to ensure efficient throughput and high quality, patient-centered care.Participates in the ongoing assessment of the quality of patient care services provided in the unit, in collaboration with other members of the management team.Collaborates with subject matter experts and other managers to create an environment of teamwork that supports improved outcomes and service.Supports a patient-first philosophy and engages in service recovery when necessary.Supports the efforts of the facility to improve engagement by operationalizing current nursing strategies, including employee rounding, hourly rounds, and other initiatives. Provides recommendations related to interviewing, selecting, and training new staff. Recommends and implements courses of action, including training and development, conflict resolution, personnel policy compliance, completion of performance evaluations, and/or disciplinary actions to ensure a competitively better organization.Assists with staff scheduling. Manages all practical aspects of staff labor in accordance with patient care needs and established productivity guidelines.Supports proper inventory control and assists with managing supplies and equipment.What qualifications you will need:Basic Cardiac Life Support must be obtained within 30 days of employment start dateRegistered NurseBachelors Degree, or Registered Nurse Diploma, or Associate DegreeOur Oncology unit offers the following.You will care for Med/Surg as well as Oncology patients that are receiving active chemotherapy treatments. Cancer patients.Nurse to patient ratio is 1:5 to 1:6.There are 27 beds.You will have the ability to help you become a CNC, ICU, ER, OR, PACU, or Interventional Radiology RN.20 to 25% of the patients are receiving chemo therapy.Room for growth.A lot of great training and mentorship.Team work is excellent. Family oriented.Will get great experience to help you grow as a nurse. Great place to learn time management.Methodist Hospital Stone Oak is equipped with the most modern technology available. With over 280 beds, services include emergency care, general surgery, obstetrics and gynecology, neonatology, oncology, neurosurgery, orthopedics, and acute rehab services.Methodist Hospital Stone Oak is accredited by the Joint Commission as a Primary Stroke Center and Chest Pain Center. The stroke rehabilitation program has received the Joint Commission's Gold Seal of Approval® for Disease-Specific Care Certification of Stroke Rehabilitation. We belong to the Texas Institute for Robotic Surgery. Our surgeons and technology offer minimally invasive options to patients. Surgeons from around the country come to train under our world class team. The hospital has been recognized by Leapfrog’s Hospital Safety Grade A and by Modern Healthcare as one of the Top 100 Best Places to Work in Healthcare. We have also been recognized as a Joint Commission Top Performer on Key Quality Measures®. Finally, by Medicare.gov as #1 in San Antonio and #6 in the entire nation. The hospital is 1 of only 102 hospitals to receive Medicare.gov’s 5-star rating. Join our team to be part of the innovation."The great hospitals will always put the patient and the patient's family first, and the really great institutions will provide care with warmth, compassion, and dignity for the individual."- Dr. Thomas Frist, Sr.HCA Healthcare Co-FounderJoin a family that cares about every stage in your career! We are interviewing candidates for our Clinical Nurse Coordinator CNC Med Surg Oncology opening.Apply today and a member of our Talent Acquisition team will reach out.We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

AutoReqId: 20958BR Pay Class: Hourly Hourly Pay Rate: $27.92/hr DOE Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Night ShiftMaintenance Electrician for our Servtex quarry located in New Braunfels, Texas . Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a Maintenance Electrician to perform basic corrective, preventive and predictive plant maintenance, and operational field support. Perform electrical repair and maintenance involving disassembly, overhaul, assembly, and adjustments of crushing and screening or mobile equipment componentsPerform electrical repair and maintenance on ready mix concrete and hot mix asphalt plantsMaintain proper tool/parts inventory for specified jobsPerform scale and automation checks for concrete and asphalt plantsProduce accurate estimates and project costsComplete maintenance projects in a timely manner to ensure production goalsMaintain up to date written or data input spreadsheets on all equipment repairsEnsure that all equipment repairs are performed accurately to the manufacturer standardsEnsure compliance with all health, safety, and environmental regulations, as well as company policies and procedures; assist with physical inspections of plant property/departments and immediate reporting of unsafe conditions and/or accidentsAssist with maintenance task when not performing electrical task What We Are Looking For A minimum of 2 years of electrical experience is requiredCompletion of an apprenticeship program or certification strongly preferredHigh school diploma or GED preferredPrior maintenance experience is a plus.Some welding experience desiredOpen pit mining operations and aggregate products experience a plus.MSHA Part 48 training a plus Physical Requirements Sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!What you will doUnder general direction, perform preventive maintenance, repair, installation and replacement of HVAC mechanical equipment.Assists branch leadership with coaching and mentoring of branch technicians with the delivery of customer satisfaction and following operational processes.Providing Level 1 technical support and assisting with technical development for others.Ensures work is being performed in compliance with state, local and Federal legal requirements and operates on the job with the highest of ethics.Properly completes all required project and service documentation.How you will do itAdheres to all Johnson Controls and customer safety standards.Provides safety leadership and instruction to all Technicians.Provides safety awareness and instruction to subcontractors on Johnson Controls work sites.Recognized as a Leader by peers while being a coach and mentor within the branch.Escalation points on technical issues and provides on-the-job training for other techniciansProvides solutions to others on very complex system problems by either troubleshooting or advising how to resolve problemsEscalation points from the branch to the technical resource team.Viewed as an expert in a given field by both employees and customers.Assists management with assuring proper field operational disciplines of other Technicians are followed.Regularly provides input on development and training needs of the branch.Assists with the identification of material needs required for service delivery.Assists the Service Manager or Customer Service Agent with identifying and scheduling individuals with the correct skills and knowledge to perform repairs or installation.Communicates with customers upon arrival and before leaving the work site.Ensures high levels of customer satisfaction Meets regularly with customer to become familiar with operating problems.Keeps customer informed on the nature of service provided outstanding issues and recommends system enhancements, upgrades, and or repairs.Manages assigned work to meet a professional level of execution, on-time and to the customer.satisfactionProvides consultant level services for customers related to building system repairs and enhancements.Ensures ultimate customer satisfaction levels with assigned customers.Conducts self-study (reading, research, and practice) to improve and maintain technical proficiency.Completes all training and certifications as required by the company.What we look forRequiredIn addition to the technical requirements of the given field, Technical Team Leads need experience where strong leadership activities have been demonstrated.Ability to act independently and to coordinate the work of other employees and contractors on a customer site.Effective interpersonal skills to represent the company to customers and other outside contacts.Able to explain technical information to technical and non-technical people.This is a bargaining union position.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

AutoReqId: 20958BR Pay Class: Hourly Hourly Pay Rate: $27.92/hr DOE Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Night ShiftMaintenance Electrician for our Servtex quarry located in New Braunfels, Texas . Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a Maintenance Electrician to perform basic corrective, preventive and predictive plant maintenance, and operational field support. Perform electrical repair and maintenance involving disassembly, overhaul, assembly, and adjustments of crushing and screening or mobile equipment componentsPerform electrical repair and maintenance on ready mix concrete and hot mix asphalt plantsMaintain proper tool/parts inventory for specified jobsPerform scale and automation checks for concrete and asphalt plantsProduce accurate estimates and project costsComplete maintenance projects in a timely manner to ensure production goalsMaintain up to date written or data input spreadsheets on all equipment repairsEnsure that all equipment repairs are performed accurately to the manufacturer standardsEnsure compliance with all health, safety, and environmental regulations, as well as company policies and procedures; assist with physical inspections of plant property/departments and immediate reporting of unsafe conditions and/or accidentsAssist with maintenance task when not performing electrical task What We Are Looking For A minimum of 2 years of electrical experience is requiredCompletion of an apprenticeship program or certification strongly preferredHigh school diploma or GED preferredPrior maintenance experience is a plus.Some welding experience desiredOpen pit mining operations and aggregate products experience a plus.MSHA Part 48 training a plus Physical Requirements Sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

What you will doJohnson Controls Inc. is looking for forward-thinking entry level talent to join our growing organization to support the fast-growing Data Center market. You will be part of a new centralized team supporting Data Center customers in North America.During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant facility HVAC chiller and commercial products in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.We are looking for entry level skilled HVAC Technicians who have experience with air cooled chillers or large roof top ducted units to support the growing data center market. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequiredBe a vital member of a new North America Data Center team responsible for entry level startup, commissioning, and aftermarket services for this fast-growing business.Must be a member or willing to join a local Union. Minimum of 1 year of practical working experience on air cooled or large roof top ducted units with some HVAC/ mechanical troubleshooting experience.Travel 50% to 60% within North America to support Data Center Customers startup and commissioning activities as well as aftermarket service trouble shooting.You may be required to pass a knowledge examination to assess proficiencies.Willing to invest in career development. You will enroll in training programs to gain knowledge in HVAC products supporting the Data Center Market.You will work with local market technicians.Attention to detail through interpersonal, digital, and written skills.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all forms.Universal EPA refrigerants license, applicable state or local licensing, good driving record and valid driver's license.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

AutoReqId: 20958BR Pay Class: Hourly Hourly Pay Rate: $27.92/hr DOE Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Night ShiftMaintenance Electrician for our Servtex quarry located in New Braunfels, Texas . Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a Maintenance Electrician to perform basic corrective, preventive and predictive plant maintenance, and operational field support. Perform electrical repair and maintenance involving disassembly, overhaul, assembly, and adjustments of crushing and screening or mobile equipment componentsPerform electrical repair and maintenance on ready mix concrete and hot mix asphalt plantsMaintain proper tool/parts inventory for specified jobsPerform scale and automation checks for concrete and asphalt plantsProduce accurate estimates and project costsComplete maintenance projects in a timely manner to ensure production goalsMaintain up to date written or data input spreadsheets on all equipment repairsEnsure that all equipment repairs are performed accurately to the manufacturer standardsEnsure compliance with all health, safety, and environmental regulations, as well as company policies and procedures; assist with physical inspections of plant property/departments and immediate reporting of unsafe conditions and/or accidentsAssist with maintenance task when not performing electrical task What We Are Looking For A minimum of 2 years of electrical experience is requiredCompletion of an apprenticeship program or certification strongly preferredHigh school diploma or GED preferredPrior maintenance experience is a plus.Some welding experience desiredOpen pit mining operations and aggregate products experience a plus.MSHA Part 48 training a plus Physical Requirements Sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

AutoReqId: 21127BR Pay Class: Hourly Hourly Pay Rate: $21.47/hr DOE Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Lube Technician for our Servtex Quarry located in New Braunfels, TX . Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do The Lube Technician will perform lubrication tasks on all plant and mobile equipment: Maintains and reviews lubrication reports and service reports.Performs oil, lube and filter service on all assigned equipmentInspects equipment conditions (wear, alignment, function, etc) and monitors oil flow and temperature observing gauges to measure performanceReports plant/equipment conditions to appropriate personnel as required.Ensures that all equipment lube tasks are performed accurately to the manufacturer standards.Other duties as assigned. Essential Skills and Experience Minimum of 2 years of experience mechanical troubleshooting and repair.Must have basic technical skills to perform mobile equipment services.High School Diploma or equivalent required Work Environment Ability to work different shifts, holidays and/or overtime as requiredMSHA Part 48 training a plusPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please. Equal Opportunity Employer - Minority / Female / Veteran / Disabled Heidelberg Materials is a drug free workplace. Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

AutoReqId: 19988BR Pay Class: Hourly Hourly Pay Rate: 28.00 HR/DOE Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Day ShiftMaintenance Electrician for our Servtex quarry located in New Braunfels, TX . Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a Maintenance Electrician to perform basic corrective, preventive and predictive plant maintenance, and operational field support. Perform electrical repair and maintenance involving disassembly, overhaul, assembly, and adjustments of crushing and screening componentsPerform electrical repair and maintenanceMaintain proper tool/parts inventory for specified jobsComplete maintenance projects in a timely manner to ensure production goalsEnsure that all equipment repairs are performed accurately to the manufacturer standardsEnsure compliance with all health, safety, and environmental regulations, as well as company policies and procedures; assist with physical inspections of plant property/departments and immediate reporting of unsafe conditions and/or accidents What We Are Looking For Industrial electrical experience requiredCompletion of an apprenticeship program or certification strongly preferredOpen pit mining operations and aggregate products experience a plus.Some welding experience preferredMSHA Part 46 training a plusHigh school diploma or GED a plus Physical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

AutoReqId: 21041BR Pay Class: Hourly Hourly Pay Rate: $23.64/hr DOE Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a DayShiftPlant Maintenance Mechanic for our Servtex quarry located in NewBraunfels, TX . Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Repair and maintain, in accordance with diagrams, sketches, operation manuals, and manufacturer's specifications, machinery and mechanical equipment, such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment, using hand tools, power tools, and precision measuring and testing instrumentsObserve mechanical devices in operation and listen to their sounds to locate causes of troubleLubricate machinery, change parts, or perform other routine machinery maintenanceReassemble machines after the completion of repair or maintenance workStart machines and observe mechanical operation to determine efficiency and to detect problemsInspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needsLubricate or apply adhesives or other materials to machines, machine parts, or other equipment, according to specified proceduresInstall, replace, or change machine parts and attachments, according to production specifications What We Are Looking For High School Diploma or equivalent preferredMaintenance experience (or formal technical training), troubleshooting and repairKnowledge of hydraulics and pneumaticsAvailable to work flexible hours, days as well as an excess of 40 hrs. per week as neededKnowledge of mechanical moving parts (chains, bearings and rollers) requiredMust have experience with a variety of hand tools, power tools, shop machines, hoists, etc.Must have the ability to read and fabricate from drawingsWeld and torch certification a plusMSHA Part 48 Training a plus Work Environment Physical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a Drug Free Workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled